Partnering with Nikon and having integrated their technology, the handheld 3D scanner M-Scan 120 of Metronor combines Nikon’s experience in scanning and Metronor’s knowledge in tracking and navigation.
Partnering with Nikon and having integrated their technology, the handheld 3D scanner M-Scan 120 of Metronor combines Nikon’s experience in scanning and Metronor’s knowledge in tracking and navigation.
Framos has launched the FSM-IMX547, a new camera accessory for the recently introduced Kria KR260 Robotics Starter Kit from AMD Xilinx.
The new version of Artec Studio 17 (AS17) 3D scanning software enables advanced functionality for quality inspection, reverse engineering and full-color CGI workflows.
Qualcomm Technologies and eInfochips are unveiling an AI inferencing-at-the-edge solution consisting of a camera, edge computing for facial recognition, and Amazon Kinesis Video Streams (KVS) for live streaming and notifications.
Inspekto introduces a new software version for the S70 autonomous vision system.
The µEye XC camera with autofocus by IDS is as easy to use as a webcam.
Centerpiece of the EoSens21CXP2 camera by Mikrotron is Gpixel’s 21MP Gsprint 4521 CMOS sensor with global shutter.
Cincoze’s GM-1000 and GP-3000 series of embedded GPU computers use very powerful Intel Xeon and Core processors.
TQ-Embedded presents the MB-Smarc-100100-1 starter kit. Dimensioned at 100x100mm, the Smarc 2.1 carrier board has a practical form factor.
Perclass and Unispectral provide the Monarch II mobile Multispectral Camera with the perClass Mira control and analytical software.
Nikon Metrology’s APDIS gap and flush measurement system can perform measurements at belt speeds of up to 140mm/s, has a large measurement volume, and uses up to three laser radar sensors for measurements around the entire vehicle.
A new inline process by Vitronic enables quality testing of lithium-ion batteries for electric vehicles.
Avnet Embedded will support NXP Semiconductors’ new i.MX 93 application processor family on the Smarc 2.1.1 form factor.
Vecow ESOM-MT-1200 is built with the new MediaTek Genio platform, enabling customers to deploy AIoT applications at the Edge.
The new Scan liquid by Attblime was developed for the precise matting of very small reflective or transparent parts.
Version 2022 of the Calypso measuring software by Zeiss IMT increases performance in data acquisition as well as in the evaluation of results.
The Raspberry PI Global Shutter cameras are built around Sony’s 1.6MP IMX296 sensor and cost only 50$.
Centerpiece of the industrial mini-ITX board LV-6715H7 by Spectra is the Intel Core i7-12800HE processor of the Intel Alder Lake series.
CamCube is a low-cost hardware module that detects people, tracks hands, performs gesture recognition and enables voice interfaces.
The iPort NTx-Deca embedded interface of Pleora seamlessly transmits low latency GigE Vision video and data at 10 Gbps over flexible Ethernet cabling.
The three models in Keyence’s SR-5000 series of stationary code readers can capture a wide range of codes quickly and reliably.
Midwest Optical offers two types of Neutral Density Filters: the ND series are filters that use absorptive filter glass, and the Ni series are filters which partially reflect a portion of the light entering the lens.
Hexagon’s Nexus platform leverages cloud technologies, allowing teams to collaborate in real time across the entire product lifecycle – from design and engineering to production and quality assurance.
The IP65 event camera by Pepperl+Fuchs continuously records the last 60 seconds of the video stream.
ABB’s 3DQi In-Line solution combines the benefits of ABB’s robots and proprietary machine vision and software to enable fast and accurate inspection of the geometry and quality of complex parts after stamping, welding, die casting and other manufacturing processes.
With the ratio pyrometers of the CSvision family by Optris, it is possible to measure temperatures from 550 to 3000°C without contact from variable distances.
Inspekto has announced the launch of its Automated Inspection Service (AIS).
Zeiss GOIM introduces the Atos LRX. Equipped with a new, ultra-bright laser light source Atos LRX enables the fast and precise digitization of very large parts, even under changing ambient light conditions.